Printer for LED lamps
The company’s 180x50 cm printing system will enable the fully automatic, inline production of such lamps.
In Europe, fluorescence lamps cannot be sold from 2012 and will be replaced by LED tubular lamps.A built-in dock is attached to the battery and when DSTT not in use folds up in a nice compact manner to about half the size of the iPhone itself.He said that a county council employee had witnessed a near miss between led lamp a car and cyclist, and he added: "If the argument is leave them off for good, then the answer is ‘no'." Until now, the fully automatic manufacturing of such lamps was not possible because of limitations of the available inline printing systems. The Swiss manufacturer of production systems has now set out to develop an automatic production line for such products.
The line consists of a large-format printing system, multiple pick-and-place machines, and a curing or reflow system. The line can produce all lengths of LED tube lamps up to 180 cm.
The inline screen/stencil printer invented by Essemtec has a printable area of 180 x 50 cm that allows a panel for multiple 180 cm tubes to be printed in one run. The machine automatically loads and prints PCBs, and forwards them to the pick-and-place system.Some incandescent bulbs, including large pet carrier aquarium lights and specialty bulbs for appliances, aren't affected by the law. The inline conveyor system is designed to transport heavy aluminium-based PCBs commonly used for LED products.
One or more pick-and-place machines are installed inline to mount LEDs and other electronic components onto the PCB. The number of machines only depends on the desired line throughput.
The MIS (Management Information System) software, a development of Essemtec,He said: "Approaching it there infrared sauna benefits looked like there was going to be chaos. But because the car drivers had to think a lot more they seemed to be being more careful. automatically balances the workload over multiple machines to achieve maximum line output. Other functions of MIS include quality assurance, consumption and stock management,"D3 is pleased to have been selected by GUESS to inflatable mattress bed be part of the new flagship store on Fifth Avenue, said Jason Barak, managing partner, D3. "Our LED digital display serves as an integral part of the store's overall brand experience for consumers." as well as the storage of production data for traceability.
For curing and soldering of the components onto the PCB, a high-performance reflow or curing system is installed inline. The oven is optimised for the needs of large and heavy boards, and provides constant process conditions at every position.
The entire line can be customised. For example, it can be completed with handling and inspection modules. For ESD or moisture-sensitive components, it is recommended to use the Tower automatic preservation system. Such components can be stored even without protective packaging.
The company’s 180x50 cm printing system will enable the fully automatic, inline production of such lamps.
In Europe, fluorescence lamps cannot be sold from 2012 and will be replaced by LED tubular lamps.A built-in dock is attached to the battery and when DSTT not in use folds up in a nice compact manner to about half the size of the iPhone itself.He said that a county council employee had witnessed a near miss between led lamp a car and cyclist, and he added: "If the argument is leave them off for good, then the answer is ‘no'." Until now, the fully automatic manufacturing of such lamps was not possible because of limitations of the available inline printing systems. The Swiss manufacturer of production systems has now set out to develop an automatic production line for such products.
The line consists of a large-format printing system, multiple pick-and-place machines, and a curing or reflow system. The line can produce all lengths of LED tube lamps up to 180 cm.
The inline screen/stencil printer invented by Essemtec has a printable area of 180 x 50 cm that allows a panel for multiple 180 cm tubes to be printed in one run. The machine automatically loads and prints PCBs, and forwards them to the pick-and-place system.Some incandescent bulbs, including large pet carrier aquarium lights and specialty bulbs for appliances, aren't affected by the law. The inline conveyor system is designed to transport heavy aluminium-based PCBs commonly used for LED products.
One or more pick-and-place machines are installed inline to mount LEDs and other electronic components onto the PCB. The number of machines only depends on the desired line throughput.
The MIS (Management Information System) software, a development of Essemtec,He said: "Approaching it there infrared sauna benefits looked like there was going to be chaos. But because the car drivers had to think a lot more they seemed to be being more careful. automatically balances the workload over multiple machines to achieve maximum line output. Other functions of MIS include quality assurance, consumption and stock management,"D3 is pleased to have been selected by GUESS to inflatable mattress bed be part of the new flagship store on Fifth Avenue, said Jason Barak, managing partner, D3. "Our LED digital display serves as an integral part of the store's overall brand experience for consumers." as well as the storage of production data for traceability.
For curing and soldering of the components onto the PCB, a high-performance reflow or curing system is installed inline. The oven is optimised for the needs of large and heavy boards, and provides constant process conditions at every position.
The entire line can be customised. For example, it can be completed with handling and inspection modules. For ESD or moisture-sensitive components, it is recommended to use the Tower automatic preservation system. Such components can be stored even without protective packaging.
没有评论:
发表评论